View Full Version : RPM Gauge not working.
twcblackhand6970
09-16-2008, 11:05 PM
So I started car up and my RPM gauge won't move from is rest spot on the needle stopper thing. The car seems to be running a bit rough, any thoughts?
Fastbird
09-17-2008, 01:47 AM
Check your fuses, and your grounds. A loose ground especially will cause some weird things to happen.
IronOutlaw
09-17-2008, 01:50 AM
I hate wiring. My headlights pop up by themselves like they're possessed sometimes and when i turn them on only 1 will pop up sometimes.
good luck to the o.p. though. Id just check fuses first.
phantomzer0
09-17-2008, 04:56 AM
I hate wiring. My headlights pop up by themselves like they're possessed sometimes and when i turn them on only 1 will pop up sometimes.
good luck to the o.p. though. Id just check fuses first.
That's because either one or both of your headlights are about to need a new nylon gear. You can get the brass gear replacement, but the nylon gears are only a few bucks off of ebay.
You'll know shortly when the headlight starts grinding really loud whenever you unlock or lock your car. It's really, really embarrassing.
twcblackhand6970
09-18-2008, 02:33 AM
Air pump fuse was out, would that cause some poor running?
Powered by vBulletin® Version 4.1.10 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.