"The Slow Turd" S/C Build

[CamaroZGuy]

Ok, so now that i am back in the states i figured that i would start the Build thread for the Turd....

Engine;
Clayton Racing 383ci short block
-Callies dragonslayer crank
-Callies compstar rods
-Custom CP pistons
-Billet center main caps
AFR 210cc heads
LT4 Intake
LE 224/236 .560/.576 114 LSA cam
TPiS 58mm TB
CC 1.6 Rockers

Exhaust;
Pacesetter LT's
ORY
Borla catback

Induction;
ProCharger P1-sc
CXRacing 31x12x4 FMIC

Fuel;
60# injectors
340lph pump (may end up adding a 255 later if needed)
stock lines
94+ rails
Aeromotive Regulator

Suspension;
UMI K-Member
UMI control arms
QA1 12 way shocks
QA1 Springs

Drive train;
700R4 (Garage build)
Vig 3200 stall
LS1 driveshaft
10 bolt (Only for now)

24x PCM conversion
Lashway Catch can setup

I am more then likely forgetting some stuff but that is the basic outline for the build.


and Pics
Headers
http://i907.photobucket.com/albums/ac278/A_Roubal/2011-11-09_12-18-00_665.jpg
340lph pump
http://i907.photobucket.com/albums/ac278/A_Roubal/2011-11-09_12-15-34_335.jpg
Comp Cam rocker
http://i907.photobucket.com/albums/ac278/A_Roubal/2011-11-09_12-13-55_359.jpg
AFR 210's and LT4 intake
http://i907.photobucket.com/albums/ac278/A_Roubal/2011-11-09_12-13-33_524.jpg
24x Coil set up
http://i907.photobucket.com/albums/ac278/A_Roubal/2011-11-09_15-28-01_744.jpg

[The SRZ]

Why such a smaller head unit w/ the ProCharger? You've got killer heads on that 383. What is your target w/ hp or 1/4 times?

[CamaroZGuy]

I got a killer deal on the p1, but when I send it in to have it checked out, it may come back as a d1

As for goals, I would love to see close to 600 and track not sure, it going to be driven more on the street.

[Fastbird]

Looks like a well thought out build man! Can't wait to see it come together.

[CamaroZGuy]

Looks like a well thought out build man! Can't wait to see it come together.

well i have been thinking about this build for a few years! just never got the funding to gather to make it happen. but as of know i am planing on having it done for the shoot out next year. but i plan on building every think on the new K-member so when its all done it only a few weeks my car is down not a few months.

[JPack]

You talk to Corey yet? If not better get cracking cause he is gonna be busy!!!!

[CamaroZGuy]

You talk to Corey yet? If not better get cracking cause he is gonna be busy!!!!

i have talked through email, but in Dec when i am home on leave i will be going over to his shop to get it going. and i am all ready expecting a long wait, but i will accept that for his quality of work.

[CALL911]

Agree with everything (ESPECIALLY upgrading to the D1SC).

Welcome home again dude! Your car is going to be a beast when you get everything all dialed in!

[CamaroZGuy]

Agree with everything (ESPECIALLY upgrading to the D1SC).

Welcome home again dude! Your car is going to be a beast when you get everything all dialed in!

thanks man! i cant wait to get it done. now only if i could get the dam tranny lines to stop leaking! lol all new 6 AN fittings 3/8 hose to cooler and its still leaking from one of the dam fittings on the trans.

[popo8]

All caught up....

[CamaroZGuy]

very similar to your build.

[popo8]

You have some higher dollar internals.... Cam, is nearly identical (wonder why the minor difference though), and it looks like your going fancyr on the ignition system...

What pulley are you gonna run on the P?

[CamaroZGuy]

For now im just going to use the stock 4.5 pully to get use to the car, but plan on getting a smaller pully later.

[popo8]

For now im just going to use the stock 4.5 pully to get use to the car, but plan on getting a smaller pully later.

Cool, Im running the 3.55" pulley, I may go smaller as well, LOL

[CamaroZGuy]

reality of the build is about to hit. im heading to Clayton Racing to get the short block started...

[popo8]

GoodLUCK!!!!

[CamaroZGuy]

well now its the waiting game....block dropped off and paid for.

[JPack]

About time. Did Jerry and Corey talk your ear off?

[CamaroZGuy]

i was there BS'in with Corey for about an hour....lol Defiantly a great guy and cant wait to get my motor back! wile i was standing there he called his supplier and ordered my crank and rods. but i wont be seeing it till about July. hes busy and im in no rush so i just requested by july when i come home to chitown next time.

[JPack]

Yeah he is busy. I think last time I talked to him he had 40 engines to do. One of those is a 408 ls engine with trickflow tea ported 235's I will be putting In a car I am building for a guy. Should be a bottom 8 sec car with the juice.

[popo8]

Its a RACE to get em fired up.... and.....GO!

[CamaroZGuy]

im looking Aug-Sept at the soonest.....you will more then likely win....

[popo8]

DAMN.... thats not gonna give you much time to get it to the shootout!

[CamaroZGuy]

Got home to OKC yesterday with the parts i had up at my parents house, i now have my S/C Kit and LS ECM. and just placed an order for my MOROSO pan, Melling 10552 oil pump and pick up. tomorrow i am planing on calling lashway and ordering my catch can set up. then tax return will be the rest of the 24x ECM.

the plan is to have EVERY thing waiting come july, so when i get the shortblock back it will just be finale assembly on the new K-member.

and POPO i plan on being at the shoot out, but not sure if the car will be joining me. i still need to find a rear end.

[popo8]

.....

and POPO i plan on being at the shoot out, but not sure if the car will be joining me. i still need to find a rear end.

Dats cool, and the first time I went I drove it there on the 10 bolt.....

[CamaroZGuy]

Fedex was nice yesterday, got my oil pump/pickup and moroso pan...

[CamaroZGuy]

http://i907.photobucket.com/albums/ac278/A_Roubal/405540_10150550432507436_511847435_8938832_1055312 590_n.jpg

been cleaning up my house and trying to localize all my parts in one area....still got some stuff random throughout the house....

[CamaroZGuy]

i got an email from Cory the other day and it sounds like my block will be hitting the machines soon. he also said that my block is all cleaned up and my rotating assembly is also in :D