Dr. Gas

[gwoodtitansz28]

i found a exaust company that makes oval tubing and frame clearance tubes. all their stuff is designed for more clearance. you guys should check it out. i hear alot of talk about clearance issues but nobody talks about this company. Its called dr. gas

https://www.drgas.net/

[gwoodtitansz28]

i guess its not as cool as i thought...

[Fastbird]

Actually this is just what I needed as I'm going to be working on my turbo inlets for my Vette over the winter and I need an oval tube source.

[Z28pr0jekt]

most people dont go this route because they would have to piece together everything and they don't know all the bends and everything they would need.. it's much simpler to just buy a bolt on kit

I actually did a business proposal when I was in undergrad for a company that solely made oval tube exhaust setups

[Z28pr0jekt]

Actually this is just what I needed as I'm going to be working on my turbo inlets for my Vette over the winter and I need an oval tube source.

oval tube for inlets?

[Fastbird]

oval tube for inlets?

You've never messed with APS inlets on a C5 have you?

[Grr]

Yeah they have made that stuff for ages. They are expensive as hell though, considering you can oval regular pipe with a 2x4 on each side and just drive over it with a pickup or small truck. I also have a big hydraulic press so i use some 1 foor metal plates and a jig i made up. The thing they dont offer is oval bends with the radius on the flat side, and that is usually what is needed to go over axles and stuff. I have made a few of those but it takes some time.

[Blubird]

yeah i remember seeing their site earlier this year, i remember it being down a few months ago, but yeah they are really expensive

[bricez28]

this site is cool but pricey. if they had a universal flat x pipe kit id be all over it

[Blubird]

x2

[lethal93ta]

thats actually what Im going to use on my car. but Im going out right in front of the tires so I think the oval will work the best and look cool as hell.