Vortech supercharger with procharger innercooler

[bucket77]

Was wondering if the procharger innercooler would work on my vortech kit on my 96 ss. The kit im talking about is this one http://shop.brutespeed.com/ATI-2AIGA1A-003-LT1-Twin-Highflow-Intercooler-field-upgrade-ATI-2AIGA1A-003.htm
Right now I have the vortech water to air kit and think the bend right before the mass airflow sensor is messing up my readings.

[BIG CAT]

what kind of problems are you having? we went 9.90's with the same setup(t-trim)

[bucket77]

When i had my 383 stroker motor in the car with this kit, the maf wasnt reading the right amount for the tuner to tune the car(tried 3 used and 1 brand new maf senors). I ended taking the motor out and put the stock one back in it with this kit and wanted to make sure i can get the car tuned right.

[BIG CAT]

some thing don't sound right. were the grams/sec erratic or did it max out? also if you think its a problem with the elbow. you might try and weld a small vertical divider in the pipe just before the maf.

[bucket77]

I want to say that he said that it should be at around 12gps at idle, but it was only like 6-7gps and i want to say when i unhooked the tube and had it running it went up to 11.