JAYB1RD
02-17-2011, 09:10 PM
My TBI 350 let go this summer (sand in the bearings) and so now I'm ready for a rebuild with more power :cool: I've got a 93 LT1 out of an f-body and the computer/harness/maf from a 94 f-body. Going to tear the motor apart first to get it clean and put some fresh parts in it like bearings, oil pump, camshaft, gaskets, etc. Once that's done I will put it in the truck and work on the wiring. Hopefully I can get some help with that here, I'm more than comfortable in the garage and am pretty handy with wiring/electronics. I'm just unfamiliar with the LT1 system and lingo I guess.
Here's a picture of the last time the truck ran well and looked good, April 1, 2010!
http://i907.photobucket.com/albums/ac271/JAYB1RD/SSPX0193.jpg
The truck already has a 14 bolt rear, 2000 stall converter, 2" budget lift, 33" MTZ tires on 17s, and lots of TLC to keep the original paint looking good. Can't wait to fire it up again :drool:
Here's a picture of the last time the truck ran well and looked good, April 1, 2010!
http://i907.photobucket.com/albums/ac271/JAYB1RD/SSPX0193.jpg
The truck already has a 14 bolt rear, 2000 stall converter, 2" budget lift, 33" MTZ tires on 17s, and lots of TLC to keep the original paint looking good. Can't wait to fire it up again :drool: