just bought stainless headers

[SexyTransAm]

did alot of reading and found that one guy off ebay made some really good fitting knockoff header. so i thought for the money id give em a try. just got em for 337 with y pipe shipped! cant wait till they get here.
here is the link
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=270553763237&ssPageName=STRK:MEWAX:IT

[RoboLuke]

I saw a lot of people over at LS1Tech really liked them. Let us know what you think once they get in and the install begins.

[harner]

They look sharp and you can't beat the price!

[KissMyWhtSS]

IIRC, they are based on the pacesetter design, but I heard that the primaries were smaller than advertised so that was the main reason I decided against them.

[SexyTransAm]

IIRC, they are based on the pacesetter design, but I heard that the primaries were smaller than advertised so that was the main reason I decided against them.
yea i knew they were the pacesetter knockoff. but iv never heard bout a primaries being small. ill let everyone know when i get em and get em in. not sure when ill get round to putting them on, workin on my other car right now. so after i get it moving again ill start on the cam swap, stall, and headers

[SexyTransAm]

got the headers in today. they look great! the the collectors and the Y pipe are 3" but the primaries are more like 1 5/8. but im still happy with em.

[Z28pr0jekt]

are the primary TUBES 1 and 5/8 or is the flange 1 and 5/8 because if the tubes are large enough you can probably port the flanges

[SexyTransAm]

the tubes are 1 5/8. but im not really worried but it. the car aint goin to make enough power for the 1 5/8 to be a choking point

[SexyTransAm]

some pics i might get round to putting em on later this month
http://i136.photobucket.com/albums/q170/SexyTransAm/95%20trans%20am/yo001.jpg
http://i136.photobucket.com/albums/q170/SexyTransAm/95%20trans%20am/yo002.jpg
http://i136.photobucket.com/albums/q170/SexyTransAm/95%20trans%20am/yo003.jpg
http://i136.photobucket.com/albums/q170/SexyTransAm/95%20trans%20am/yo004.jpg
http://i136.photobucket.com/albums/q170/SexyTransAm/95%20trans%20am/yo005.jpg

[bluebird94]

Awesome, I'm thinking about getting those

[popo8]

Wow, they look GREAT!!!!!

[Camaroking1996]

How much did u pay???:helpsmilie:

[SexyTransAm]

337 to my door

[CamaroGirl]

not bad at all! those look great, think i paid close to that for my ceramic pacesetters.

[CamaroGirl]

Awesome, I'm thinking about getting those

AHA! so is this le plan?!

[bluebird94]

AHA! so is this le plan?!

one of them :)

[CamaroGirl]

one of them :)
should uh, let me in on what you're up to little lady!

[Firebirdjoe]

Just pick me up a set of these also. Let me know how they go in.

[ksmyss]

I have the stepped version waiting to go in.

[68z28]

Finished up installing this set a couple weeks ago. Fitment is good. Mind were just barely grazing the steering shaft.

[96BrknZ]

how is the coating holding up on these? still worth it?

[SexyTransAm]

there is no coating. the metal is stainless steel. but they have only had bout 3 min of run time on em

[Young Maro]

Can't beat that price dude

[SexyTransAm]

well 150 miles on em nd they still look great and the cool down fast as hell

[myfirstchevy]

how does the power feel? noticable increase?

[SexyTransAm]

lol well yea but i did headers cam and stall all at once

[96formula8az28]

lol well yea but i did headers cam and stall all at once

I got a set from ebay also. just put them on i paid 310 for them free shipping! the are the 1 5/8s also. with a 3 inch y pipe! with a made in to a 2 3/4 reducer on the end of the y pipe to hook into the stock cat back! the only problem i had was the steering shaft, i had to dent the header tube to make it fit. also there is not much room to remove the oil filter! lol... but i did notice a increes in the power and not only to metion the sound is sweet!

[SexyTransAm]

mine clear everything with no denting needed and can get to the filter just fine

[killerz28]

They look pretty decent especially for the money.

[VinR1]

the ebay ad expired - can you PM me the name of the seller?

[RoboLuke]

What's the deal with the insanely mixed reviews, I've heard from a few sites now that some fit perfectly and others have a variety of fitment issues.

[SexyTransAm]

i dont remember the name of the seller right off ill look it up ands get back to ya

[SexyTransAm]

What's the deal with the insanely mixed reviews, I've heard from a few sites now that some fit perfectly and others have a variety of fitment issues.
thats because of the diff people that make em. the guy i got mine from iv heard dont make em any more. when i was reading before i bought everyone said the LLP knock off fit like hell, and the pacesetter fit well from some sellers but not others

[SexyTransAm]

the sellers name is eworldsales1, and the stores name is E-Sales Race Distribution

[VinR1]

thanks Sexy

I've personally seen and read reviews of the headers by ebay sellers 'ap1ap2' and 'speeddaddy' and besides the usual steering shaft and k-member, those two fit good

whats weird is if you search for 'LT1 stainless headers', you get over a hundred hits and they all use the same damn photos

[ksmyss]

What's the deal with the insanely mixed reviews, I've heard from a few sites now that some fit perfectly and others have a variety of fitment issues.
It's like that with any header on these cars. I have seen pacestters that fit great on one car and had problems on 2 others. The same for the hookers and any other header you look at.

[draggins10]

the sellers name is eworldsales1, and the stores name is E-Sales Race Distribution

Do you think these stainless steel headers are better at keeping heat out of the engine bay compared to pacesetters ceramic coated longtubes?

Im trying to decide which one I should order

[SexyTransAm]

SS is not good at all for keeping heat out of the bay!

[ItSSlowZ28]

so would spraying them yourself with some ceramic paint help at all?

[draggins10]

SS is not good at all for keeping heat out of the bay!

Ok so is it better to go with Pacesetter LTs ceramic coated?

[VinR1]

eworldsales now has stainless LT1 headers again... for almost $600

[93phoenix]

that ceramic paint isnt going to do squat...wrap em if your worried about heat. on another note, most people are over primaried with the 1.750 inch headers....alot like true dualed 3 inch exhaust.